Blowing Machine
an apparatus for producing an air blast for metallurgical purposes. The earliest blowing machine was, doubtless, some form of the common bellows.
Blowing Engines. For blast furnaces and for Bessemer steel converters, blowing engines of large size are employed. In the former, the strength of the blast sometimes is as high as 10 pounds per square inch. For the Bessemer converter, where a much greater pressure is repr required, it occasionally reaches 30 pounds per square inch. A blowing engine consists of a steam cylinder, an air cylinder, and a large air chamber, to insure a uniform blast. Sometimes the latter is dispensed with, and large main pipes used instead. The blowing cylinder is of cast iron, with an air-tight piston, which, as it ascends and descends with the motion of the engine, alternately inhales and expels the air at each end. Trompe. In the Catalan forges of Spain, the south of France, and some parts of the United States, there is a very ingenious water blowing machine in use called a trompe; but it can only be advantageously employed where a fall of a few yards of water is available. A cistern to act as a reservoir for the water; pipes (generally two in number), through which it descends; and a wind chest to allow the air and water to separate, constitute the essential parts of the apparatus. It is put in operation by lifting the wedge with a lever; this allows the water to rush down the pipe, and, in doing so, draws in air through sloping holes, called aspirators, at the throat of the pipe. A continuous current of water and air is thus supplied to the wind chest, which is provided with an opening for the escape of the water, while the air passes out in a regular stream by the nozzle pipe. The height from which the water falls determines the tension of the blast; but the height seldoms exceeds 27 feet, which gives a pressure of from 12 to 2 pounds to the square inch. The separation separation of the air from the water is greatly promoted by the current impinging on the platform.
Fans. The fan is another machine for producing blasts of air. It is employed for such purposes as the melting of pig iron in foundries and for forge fires. It is also used as an exhaust to withdraw full air from mines, public buildings, and ships. For mines it is occasionally of a very large size. The win- BLOWPIPE nowing of corn is another application of it. The common blast fan is like a wheel with the arms tipped with vanes or blades, instead of being joined by a rim, and it is placed usually in an eccentric position, inside a chest, with central openings on each side for the admission of air. It is generally driven by steam power, and as it revolves, air is sucked in at the center, drawn toward the tips, and impelled forward through the exit pipe.
Rotary Pressure Blowers. These are machines introduced in comparatively recent years. They act by regular displacement of the air at each revolution, since their pistons or drums closely fit their cases. In this respect they differ from fans, because, although there were no outlet for the blast, a fan could be kept revolving, but in such a case a pressure blower would stop.