The Encyclopedia of Founding

Twelve hundred entries from the golden age of cast metal — how bells are founded, why brass is not bronze, what a cupola melts and a core withstands — by Simpson Bolland, the trade's great teacher.

HomeP › Paste

Paste

Foundry-paste is simply flour mixed with water to a consistency suitable for the joining together of dry-sand cores and moulds that are made in sections. It may also be used in the coring of moulds when it is desirable to effectually prevent the escape of metal at the points of junction, its spreading quality permitting the soft, yielding mass to be forced into every crevice, where, if the mould be hot enough, it dries into a hard impenetrable mass. There is much danger, however, in using too much paste, especially in cold moulds. When the molten metal enters the mould the wet surfaces are at once converted into steam, which, if not all ejected during the process of casting, seldom fails in producing blow-holes at some part or other. See SIZE; BLISTER; BLOW-HOLES.

Paste Gems are a glass imitation of precious stones, made from a combination of silica, potash, borax, red oxide of lead, with some arsenic. This is fused gently in Hessian crucibles, in the furnace, for about twenty-four hours, and it then becomes a base for the manufacture of all the spurious gems. For the ruby, 72 parts of oxide of manganese are mixed with 2880 parts of the paste; emerald--green oxide of copper 42, and oxide of chrome 2, to paste 4608 parts--sapphire: oxide of cobalt 68, to paste 4608 parts; fused for thirty hours. Amethyst--oxide of manganese 36, oxide of cobalt 24, purple of cassius 1, to paste 4608. The tints of the real stone are so exactly imitated in many of these imitations as to deceive any but the best judges. See PRECIOUS STONES.

← PartingPatent Fluxes →