Loam
Foundry loam is a mixture of sand with clay and some form of venting medium.
Refractory fire-sands suitable for loam are of themselves too friable to form a compact, hard body. Clay is therefore added to impart adhesiveness, with some accompanying substance, as manure, etc., to counteract its imporous quality, and leave the mixture when dry a hard, unyielding substance, that is permeated with countless small holes through which the surface gas finds its way to the exterior.
The proportion of clay employed must be regulated by the class of castings the loam is for.
The following mixtures are for ordinary use in almost any foundry, and any sands which approximate in their nature to the general run of Jersey, fire, and moulding sands will answer. If the castings are unusually light, as thin plate castings in loam, the clay-water should be proportionately thinner. Hand-made Loam for Loam-moulds and Core-barrels.--Fire-sand, 5; moulding-sand, 2; horse-manure, 1 1/2. Mix with thick clay-water.
Mill-made Loam for Loam-moulds and Core-barrels.--Fire-sand, 7; moulding-sand. 2; horse-manure, 2. Mix with thick clay-water, and grind no longer than is necessary to mix the ingredients intimately together. See HORSE-MANURE; VENTING; FACING-SAND; LOAM-MILL.
Loam-board is a technical term for any strickle, strike, sweep, or templet, so called, that may be employed for forming some part of a mould in loam; whether it be drawn along by the hands of a moulder horizontally, as for a pipe, attached to a centre-spindle to form circular moulds vertically, or be secured fast whilst the mould or core rotates part it, as for cores, both horizontal and vertical.
Such boards should be bevelled on the edge, using the sharp edge for roughing up and the opposite way for skinning. See SWEEP-BOARD; ROUGHING-UP; STRICKLE; LOAM.
Loam-bricks are made in cast-iron moulds. The moulds being set on a smooth plate in the oven are filled with stiff loam and allowed to remain until dry. They are then useful for fashioning into cores with the saw and file, or may be used for building in parts where, on account of their rigidity, the ordinary bricks would interfere with the free contraction of the casting. The loam-bricks, being less rigid, yield readily to the pressure. See LOAM.